Electricity Training Set

KL110

The KL-110 ELECTRICITY TRAINING SET is a comprehensive and self-contained system suitable
for tuition and experimentation with electricity circuits and digital logic circuits. All
necessary equipment's for electronic circuit experiments such as power supply, Pulse generator,
Digital meters are installed on the main unit. The 2 modules cover a wide variety of essential
topics in the field of electronics circuit. It is indeed a time and cost saving device for both
students and researchers interested in training, developing and testing circuit prototype.


Ideal for analog/digital circuit experiments and designing exercises.
Integrated trainer, with complete curriculum.
Complete with power supplies and test systems for easy and efficient experimentation.
All modules equipped with an 8-bit DIP switch for fault simulations.

Main Unit (KL-11001)

(1). DC POWER SUPPLY
     A. Fixed DC Power Supply 
          1. Voltage Range: ±5V ±12V
          2. Maximum Current Output: 5V/300mA ±12V/300mA
          3. With output overload protection.
     B. Dual DC Power Supply  
          1. Voltage Range: ±3V ~ ±18V continuously adjustable.
          2. Maximum Current Output: 1A
          3. With output overload protection.
(2). AC POWER SUPPLY
     A. Voltage Range: 9V ~ OV ~ 9V
          1. Maximum Current Output: 500mA
          2. With output overload protection.
(3). SIGNAL GENERATOR 
     A. Pulse generator
          1. Frequency  : 1Hz - 10KHz (4 Ranges)
             a. 1Hz ~ 10Hz
             b. 10Hz ~ 100Hz
             c. 100Hz ~ 1KHz
             d. 1KHz ~ 10KHz
          2. Fanout: 10 TTL load
     B. Pulser circuit: (switch activated)
          1. 2 sets of independent control output.
          2. Each set with Q, /Q output, pulse width > 5mS
          3. Each set switch with DEBOUNCE circuit.
          4. Fanout: 10 TTL load
     C. Sine-wave Generator
          1. Output frequency:
             10Hz-100KHz,4settings,continuously adjustable
          2. Accuracy: ±5%
          3. Output Impedance:50 Ohm
          4. Output Voltage: >=18Vpp(open loop), >=9Vpp(with 50 Ohm load),
(4). 3 1/2 DIGIT DIGITAL VOLTMETER /AMPMETER
     A. DC Voltage Range: 2V, 200V
     B. Voltage Accuracy: ± 0.3% of reading + 1 digit
     C. Current Range: 200 µA, 2000mA
     D. Current Accuracy: ± 0.5% of reading + 1 digit
(5). BUZZER
     A. With driver circuit
     B. Driver signal: TTL, LS TTL, CMOS level
(6). VARIABLE RESISTOR
     A. 10KOhem, 0.25W variable resistor with 3 terminals (A,B,C).
(7). LED Indicator
     8 LED Indicator
(8). 8 Outputs stage
     A. 8 - bit DIP switch.
     B. Fanout: 10 TTL load
(9). BCD - 7 Segment
     1. 4 sets of independent 7 segment LED display.
     2. With BCD, 7 segment decoder/driver and Dp input terminal.
     3. Input with 8-4-2-1 code.
(10).DPDT Relay(5A/220V) AC
     A. Power supply: DC +12V
     B. Contact rate: DPDT, 5A/220V
(11).ACCESSORIES
     A. Experiment Manual, User's Manual
     B. Connect Leads: 2mm - 2mm, 300mmL, 25pcs
     C. Connect Plugs: 0e2mm 10mmL 10pcs
     D. Magnet: 1pc
     E. Logic Pulser: 1 set

FEATURE
   1.Each  module  is  equipped  with  an  8  -  bit  DIP  switch  for fault simulations.  Students  can
     practice trouble simulations.  Students  can  practice trouble  DIP switch to different positions.
   2.Detailed  solution  for  the  simulated  faults  are  included  in  the instructor's manual.
   3.All terminals on the modules accept 2mm plugs.
   4.Comprehensive experiment and instructor's manual.
   5.Module dimension: 255x165x30mm
          		
LIST OF EXPERIMENTS
 1.AC and DC sources (KL-11001)
   1-1 Fixed DC Power Supply: ± 5V, ± 12V
   1-2 Dual DC Power Supply: ± 3V ~ ± 18V,continuously adjustable.
   1-3 AC Power Supply: 9V-0V-9V
 2.Electromotive Force (KL-14001)
   2-1 Lenz's Law
   2-2 Faraday's Law
 3.Polar voltage (KL-11001)
   3-1 Fixed DC Power Supply: ± 5V, ± 12V
   3-2 Dual DC Power Supply: ± 3V ~ ± 18V,continuously adjustable.
 4.Using the multimeter (KL-11001)
   4-1 Measuring voltages
   4-1-1 3 1/2-DIGIT DIGITAL VOLTMETER
   4-1-2 DC Voltage Range: 2V,200V
   4-1-3 DC Voltage Accuracy: ± 0.3% of reading + 1digit
   4-2 Measuring AC and DC currents
   4-2-1 3 1/2-DIGIT DIGITAL VOLTMETER/AMPMETER
   4-2-2 DC Current Range: 200 µA, 2000mA
   4-2-3 DC Current Accuracy: ± 0.5% of reading + 1digit
   4-3 Measuring resistance
 5.Measuring resistance
 6.Special resistors (Thermistor, photoresistor) (KL-14001)
   6-1 Thermistor Characteristics
   6-2 CDS Characteristics
 7.Connection of resistances (KL-14001)
   7-1 Resistances in series
   7-2 Resistances in parallel
   7-3 Series and parallel connection of resistances
 8.Kirchhoff's law (KL-14001)
 9.Variable resistances (potentiometers - rheostats) (KL-14001)
   9-1 5KB variable resistor with 3 terminals (A,B,C).
 10.Coil self inductance measurement using volt meter and ampere meter.(KL-14001)
 11.RL circuits. (KL-14002)
 12.Capacitance measurements using voltmeter and ampmeter.(KL-14002)
 13.RC circuits. (KL-14002)
   13-1 DC RC Circuit
   13-2 AC RC Circuit
 14.Charging/Discharging of capacitors (KL-14002)
 15.RLC circuits (KL-14002)
 16.Parallel resonance (KL-14002)
 17.Series resonance (KL-14002)
 18.Electric power (KL-14002) 
   18-1 Power in DC Circuit
   18-2 Power in AC Circuit