MV-3201B 10Hz ~ 1MHz

Description:
 The MV-3201B is a 2 CH AC millivoltmeter, providing an AC voltage mensurement range
 of 300µV to 100V full scale with a bandwith of 10Hz~1MHz for both CHl and CH2.
 Two different input signals can be measured simultaneously or separately according
 to the setting of a pushbutton mode switch.The MV-3201A employs BNC input connectors,
 eliminating influence by extend induction during low level measurements. This
 instrument can be used as a level meter with both the dB (OdB=1Vrms) and dBm
 (OdBm=lmW/600Ohem) scales, either AC out put terminals are provided for each CH on
 the rear panel, so the CH1 and CH2 signals can be observed on an oscillsiope screen
 or the MV-3201A can operate as a preamplifier.

Features:
 - Wide band range: 5Hz- 1MHz
 - Testing Ronge: 100BV-300V
 - Three scales, mV/dB/dBm with three different color, for reading easily
 - High stability and high confidenc
Specification:
 Voltage Range:
      300µV ~ 100V (full scale) in 12 range
 dB Range:
      -70dB-40dB in 12 Range (OdB=1Vrms)
 Accuracy: < 3% of full scale (af 1KHz or 400Hz)
 Input Impedance: 10MOhem for each range 40pF a less
 Band Width:
      ± 3% 20Hz - 200KHz
      ± 5% 10Hz - 500KHz
      ± 10% 10Hz - 1MHz
 Noise): 
      With in 2% of full scale by shortening input
 Maximum Input (DC + ACp-p):  
      300V (300µV ~ 1 V range)
      500V (3V ~ 100V range)
 Amplifier Output :
      0.1Vrms ± 10% at open load
 Output Impedance: 600Ohem ± 10%
 Power Supply :  
      AC 115V/230V 50/60Hz 6VA approx.
 Size & Weight:     
      215(W) x 152(H) x 200(D)mm
      Appro x 3.5kg